Anti-seismic-----designing for safety structure ---The masonry project must can resist the impact of earthquake ---Anchoring(connected with bottom) ---Reinforcement(transverse and vertical rebars)
After masonry, joingting between bricks need to be done. It can be in different ways according to different design effect.
TERCA bricks are laid as a single vertical layer from bottom to top, which need transverse rebar commection among them. The diameter of rebar is decided by gap between bricks(gap suggestion 10mm). The distance between vertical rebars are between 60 to 70cm(depend on the height of building and diameter of rebars).
With the increasing amount of plies, the hole of TERCA bricks need penetrated by rebars which should be anchored by advanced junction or metal fittings. The diameter of rebar is decided by gap between bricks(gap suggestion 10mm). The distance between vertical rebars are between 80 to 100cm(depend on the height of building and diameter of rebars).
Our international technique support team is consist of many experienced roof technicists. They are not only familiar with latest roof installation technique but also familiar with each country localized installation technique. And they are all available for on-site guidance. The guidance is run though the initial installation to speical nodes treatments. The knowledge and experience of VMZINC is shared through guidance. VMZINC is working with installers together to find the best solution.
VMZ Pro-zinc is a kind of technical service for installers by VMZINC. Installers can get practical installation experience through training and on-site guidance. VMZ Pro-zinc: Ensuring the correct installation of products. Ensuring the technique support adapt to local installation specification. Providing localized support to make sure the installers can process installation independently.